? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. shielded power inductors C xfl2006 document 763-1 document 763-1 revised 07/02/10 inductance 2 dcr nom 3 dcr max 3 srf typ 4 i sat (a) 5 i rms (a) 6 part number 1 20% (h) (ohms) (ohms) (mhz) 10% drop 20% drop 30% drop 20c rise 40c rise xfl2006-102me_ 1.0 0.153 0.169 170 0.71 1.0 1.2 0.910 1.22 xfl2006-222me_ 2.2 0.278 0.306 110 0.49 0.69 0.78 0.710 0.950 xfl2006-332me_ 3.3 0.460 0.506 88 0.42 0.56 0.66 0.550 0.720 xfl2006-472me_ 4.7 0.665 0.732 68 0.31 0.44 0.52 0.500 0.660 xfl2006-562me_ 5.6 0.75 0.825 61 0.30 0.43 0.50 0.460 0.600 xfl2006-682me_ 6.8 0.92 1.02 57 0.26 0.35 0.41 0.400 0.520 xfl2006-822me_ 8.2 1.08 1.19 51 0.24 0.33 0.39 0.370 0.490 xfl2006-103me_ 10.0 1.27 1.40 45 0.24 0.31 0.37 0.345 0.440 xfl2006-153me_ 15.0 2.02 2.22 37 0.19 0.25 0.29 0.265 0.350 xfl2006-223me_ 22.0 2.78 3.06 30.5 0.150 0.205 0.240 0.235 0.305 xfl2006-333me_ 33.0 4.45 4.90 24.0 0.110 0.150 0.180 0.160 0.205 xfl2006-473me_ 47.0 5.60 6.16 19.5 0.090 0.130 0.155 0.155 0.205 xfl2006-563me_ 56.0 6.65 7.32 16.5 0.085 0.120 0.145 0.145 0.195 xfl2006-683me_ 68.0 8.50 9.35 16.0 0.080 0.115 0.135 0.115 0.155 xfl2006-823me_ 82.0 9.25 10.18 13.5 0.065 0.090 0.115 0.125 0.165 xfl2006-104me_ 100.0 11.10 12.25 13.0 0.065 0.090 0.115 0.100 0.135 core material composite environmental rohs compliant, halogen free terminations rohs compliant tin-silver-copper over tin over nickel over silver. other terminations available at additional cost. weight 12 ? 13 mg ambient temperature ?40c to +90c with i rms current, +90c to +130c with derated current storage temperature component: ?40c to +130c. t&r packaging: ?40c to +80c resistance to soldering heat max three 40 second reflows at +260c, parts cooled to room temperature between cycles moisture sensitivity level (msl) 1 (unlimited floor life at <30c / 85% relative humidity) failures in time (fit) / mean time between failures (mtbf) 38 per billion hours / 26,315,789 hours, calculated per telcordia sr-332 packaging 2000/7 reel; 7500/13 reel plastic tape: 8 mm wide, 0.28 mm thick, 4 mm pocket spacing, 0.76 mm pocket depth pcb washing only pure water or alcohol recommended ? lowest profile, ultra-miniature, shielded power inductor ? soft saturation makes them ideal for vrm/vrd applications. 1. when ordering, please specify packaging code: xfl2006-823me c packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (2000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. d =13 machine-ready reel. eia-481 embossed plastic tape. factory order only, not stocked (7500 parts per full reel). 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dcr measured on a micro-ohmmeter. 4. srf measured using agilent/hp 4395a or equivalent. 5. dc current at which the inductance drops the specified amount from its value without current. 6. current that causes the specified temperature rise from 25c ambient. 7. electrical specifications at 25c. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2010 specifications subject to change without notice. please check our website for latest information. xfl2006 shielded power inductor series document 763-2 document 763-2 revised 07/02/10 typical l vs current typical l vs frequency irms derating dimensions are in inches mm -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c percent of rated rms i 0.079 0.008 2,0 0,2 0.075 0.008 1,9 0,2 0.024 0,60 max 0.057 1,45 0.087 2,2 0.041 1,04 0.014 0,35 min recommended land pattern 0.1 10 1 100 0.1 1 100 10 frequency (mhz) inductance (h) 82 h 3.3 h 10 h 33 h 1 h 0.01 0.1 1 10 current (a) 100 inductance (h) 0.1 10 1 100 82 h 3.3 h 10 h 33 h 1 h
|
